You are looking at a custom made switch panel for your cupholder area. This will work in an automatic car and a manual car. This is made from lasercut, black acrylic, and comes complete with the switches. This piece fits into your cupholder area without modification to the vehicle.
This switchplate uses the available area of your rear cupholder to house the switches and wiring. You will still keep your front cupholder, but the rear will no longer be available. A small hole may need to be drilled to route your wiring, or if you can come up with something craftier, that's fine as well.
You are allowed to choose how many switches you would like (between 2 - 5), what type of switch you want (On / Off rocker switch, momentary rocker switch, or a cutout/bottle opener switch) and the color of the LEDs in the rocker switches (amber, red, blue, green - applicable only in On / Off switches.).
We also give you the option of typing in custom labels. For example, you may want a fan switch, so when prompted below, you would type in "Fan". We will also allow you to choose the color of the lettering .
Lettering Color (approximate color):
We have the layout of a 2, 3, and 4-switch panel pictured below. The 5 switch panel is pictured with #5 being the middle switch:
These will mount with 3M double-sided automotive emblem adhesive tape.
We will only use the 3 types of switches seen in the photos. If you want a modification of this design, email us.
We will not provide any wiring or instructions other than what is on this page - just the switches.
2 switches are included in the base price. Every switch afterward will add to the cost of the part.
On / Off switches are for things like cooling fans, nitrous arming, line locks, bottle warmers. Wiring instructions here.
Momentary switches are used for things you only want to happen for an instant, such as nitrous purging.
3-Position switches are used for variable speed cooling fans. It will be up to you to supply the proper relay. This switch is a 3-pin switch.
Cutout Switches / Bottle Opener Switches are used for operating cutouts and bottle openers, or anyting else that has a 2-way motor. These are 6-pin switches that are momentary in both up and down positions, meaning the moment you let go of up or down, they snap back into the off position.